Construction Termite Protection

We have recently treated a termite protection to a house in Bulleen by installing the Reticulation System. Reticulation is a system designed to distribute termiticides around the base of buildings to form a termite barrier in accordance with Australian Standard AS 3660.1-2014 (for more details see the Termites Protection for New Buildings).

Drill and Inject of the Chemical is a prevention and corrective treatment. This treatment is carried out when the soil around the building is covered by the concrete layer such as driveway. We have recently treated this method at an existing house in Lower Templestowe, our team drilled and injected the chemical Termidor to create a termicidal barrier around the perimeter of the building.

Term Stop is the Reticulation system we offer to our customers. With the changes in the Australian Standards, the reticulation System is an acceptable Part A and Part B treatment to Subfloor and slab. Attached photos showing 6 Units Project in Doncaster East in Melbourne and how we installed the reticulation system in the garden area.

Part B Termites Chemical Barrier is a very important stage of complete termite treatment to any new building. The most suitable time to apply the termite chemical barrier solution is after construction is completed fully and cleaned up, cutting or/and filling are all done and before concreting/paving or gardening to the perimeter of the building.

The following photo shows the HomeGuard blue sheets installed to subfloor walls and stumps for termite protection before installing barrels and joists in a new house construction project in Melbourne. Best Termites Control provides professional termite protection solutions using HomeGuard Blue Sheets in Melbourne.

In the case when a Builder missed calling us on time before concreting, we have a very professional and acceptable HomeGuard solution for termite protection. By chiselling around every penetration and applying silicon like material name (Termiflex) produced by HomeGuard physical termite barrier manufacturer to solve this issue of termite protection.

The following picture shows the Part A Termites treatment. The Part A Termites Treatment is done today for a new house in Werribee. This job is done by Best Termites Control For more information about Pre-Construction termites protection and treatment, please click here.

Best Termites Control is specialized in new buildings’ termite protection systems. At a Site in Seaford, we have treated the double block walls on the boundary line, by using HomeGuard Blue Sheets. We have glued the sheets with Termiflex products made by the same manufacturer. The idea is to seal the entry point between the blocks and not allow termites from reaching the timber.

Best Termites Control has accepted to do a job for a construction company treatment to 2 units in Malvern Area (pre-construction termite protection solution). The subfloor was a steel structure, but the surveyor has asked the builder to do termite protection. The reason the termite treatment is required even the subfloor structure is steel is, termites are able to bridge over the steel and reach the timber.